WFL Prime Undersink Water Filter – Three Filtration Stages

The WFL Prime Undersink Water Filter is a three stage filtration system that connects to your cold water mains and sits under your kitchen bench.

• Connects to your cold water mains with a mains connector supplied.
• Engineered to provide safe and healthy drinking water.
• Specialised in Sediments, Chlorine, Taste, Odours, Heavy Metals, Parasites and Fluoride removal.

What are the WFL Prime Undersink Water Filter applications?

• Works with water that has been previously disinfected.
• Connects to your kitchen cold water mains (Sits under your Kitchen Countertop).
• Undersink systems are installed with a dedicated filtered drinking faucet.
  Dedicated Drinking Faucet

Recommendations

• Instead of having a separate faucet for filtered water, consider having a 3 Way Mixer to avoid drilling a hole through your stone/wood bench. 3 Way Mixers provide hot, cold and filtered water (all in one).
• 3 Way mixers have one lever for hot and cold, and a separate lever for only filtered water.
• In 3 Way Mixers, filtered water has a separate hole in the spout. Therefore, filtered and unfiltered water never touch.

Not suitable with water that is microbiologically unsafe or of unknown quality without adequate disinfection before the system.

Specifications

• • MPN: SYS-US925-SFC
  • Reduces Sediments, Chlorine, Taste, Odours, Heavy Metals, Parasites and Fluoride removal.
  • Flow Rate: 3 LPM
  • Operating Temperature: 2°C to 38°C
  • Maximum Pressure: 125 psi
  • National Sanitation Foundation (NSF) certified and WaterMark Certification Scheme of Australia approved.
  • Dimensions: 270 W x 370 H x 130 D

What are the Filtration Stages in the Prime Undersink Water Filter?

1st Stage: NSF CERTIFIED SEDIMENT FILTER

• Sediment Filter with 5 micron pore size.
• Protects other filters from premature blockages.

2nd Stage: NSF CERTIFIED FLUORIDE FILTER

• Activated Alumina Filter with 5 micron pore size.
• Reduces 97% of fluoride.

3rd Stage: NSF CERTIFIED CARBON FILTER

• Carbon Filter Designed and Made in USA.
• Captures particles greater than 1 micron.
• Specialised lead removal media.

What does the system includes?

Contents:

• 3 x 9” x 2.5” Water Filter Housing Sump
• 1 x Spanner
• 1 x Stainless Steel Bracket
• 2 x 1/4″ Elbows
• 1 x ½” Tee - Mains Connector
• 1 x PLV 350kPa
• 1 x Installation Instructions
• 1 x Chrome Faucet
• 1 x 1/4" Food Grade Blue Tube
• 3 x Filter Cartridges
• 1st Stage: SEDIMENT FILTER
• 2nd Stage: FLUORIDE FILTER CARTRIDGE
• 3rd Stage: CARBON FILTER CARTRIDGE

How often should I replace the filters?

• 1st Stage: SEDIMENT FILTER CARTRIDGE: 1 Year
• 2nd Stage: OMNIPURE FLUORIDE FILTER: 200 gal (6 Months)
• 3rd Stage: CARBON FILTER CARTRIDGE: 2,500 gal (1 Year)

Note: Filter capacity varies dependant on water quality.