Grandmaster Undersink Water Filter

WFL Grandmaster Undersink Water Filter – Two Filtration Stages

The WFL Grandmaster Undersink Water Filter is a two stage filtration system that connects to your cold water mains and sits under your kitchen countertop.
  • Connects to your cold water mains with a mains connector supplied.
  • Engineered to provide safe and healthy drinking water.
  • Specialised in Fluoride, Bacteria, Viruses and Parasites.
  • Silver Edition Undersink Water Filter.

What are the WFL Grandmaster Undersink Water Filter applications?

  • Works with water that has been previously disinfected.
  • Connects to your kitchen cold water mains (Sits under your Kitchen Countertop).
  • Undersink systems are installed with a dedicated filtered drinking faucet.
    Dedicated Chrome Drinking Faucet Dedicated Drinking Faucet

Recommendations

  • Instead of having a separate faucet for filtered water, consider having a 3 Way Mixer to avoid drilling a hole through your stone/wood bench. 3 Way Mixers provide hot, cold and filtered water (all in one).
  • 3 Way mixers have one lever for hot and cold, and a separate lever for only filtered water.
  • In 3 Way Mixers, filtered water has a separate hole in the spout. Therefore, filtered and unfiltered water never touch.
Undersink Water Filter Set Up Undersink Water Filter Set Up
Not suitable with water that is micro biologically unsafe or of unknown quality without adequate disinfection before the system.

Specifications

              What are the Filtration Stages in the WFL Grandmaster Undersink Water Filter?

              1st Stage: NSF CERTIFIED FLUORIDE FILTER

              • Activated Alumina Filter with 5 micron pore size.
              • Reduces 97% of fluoride.

              2nd Stage: ARAGON ULTRASAFE FILTER

                What does the system includes?

                Contents:

                • 2 x 9” x 2.5” Water Filter Housing Sump
                • 1 x Spanner
                • 1 x Stainless Steel Bracket
                • 2 x 1/4β€³ Elbows
                • 1 x ½” Tee - Mains Connector
                • 1 x PLV 350kPa
                • 1 x Installation Instructions
                • Chrome Faucet
                • 1 x 1/4" Food Grade Blue Tube
                • 2 x Filter Cartridges
                • 1st Stage: FLUORIDE FILTER
                • 2nd Stage: ARAGON FILTER

                How often should I replace the filters?

                • 1st Stage: FLUORIDE FILTER: 200 gallons (6-12 Months).
                • 2nd Stage: ARAGON FILTER CARTRIDGE: 6,600 gallons (2 Years).
                Note: Filter capacity varies dependant on water quality.

                Leave a comment

                Please note, comments need to be approved before they are published.