- 2 Pre-filters: PP sediment filter. Carbon Block filter. They remove large contaminants and protect the RO membrane from chemicals (disinfectants) like chlorine and chloramines.
- 2 Post-filters: Carbon Block Filter. Alkalising Filter. They provide the final polishing before the purified water is delivered to the faucet.
- The alkalising filter restores and remineralises the water.
- The heart of the system is the Reverse Osmosis (RO) filter that removes contaminants down to 0.0005 microns β so small that only water molecules can squeeze through but virtually nothing else.
- The end result is great-tasting bottled-water quality.
What are the WFL ROTM Reverse Osmosis applications?
- Connects to the cold water line (Under your kitchen bench).
Recommendations
- If installed under the sink, this filter works with a flow rate of 16 L/h. Therefore, requires a reverse osmosis storage tank to collect water coming form the membrane to then have water available at 3 LPM.
- Because the reverse osmosis membrane rejects polluted water, this system has a black tube that connects to the drain.
Specifications
- MPN: SYS-ROTM5
- Reduces Chlorine, Taste, Odours, Fluoride, Calcium, Heavy Metals, Chloramines, TDS, VOCs, Parasites, sodium and more.
- Membrane Out Flow Rate: 16 L/h
- System Out Flow Rate: 3 LPM
- Operating Temperature: 2Β°C to 38Β°C
- Maximum Pressure: 125 psi
- Components Made in Taiwan
- National Sanitation Foundation (NSF) certified and WaterMark Certification Scheme of Australia approved.
What are the filtration Stages in the WFL ROTM Reverse Osmosis?
1st Stage: POLY SPUN SEDIMENT FILTER
- 9β x 2.5β Layered Polypropylene Sediment Filter for the most efficient reduction of rust, mud, dirt, sand, silt, and other fine particles.
- Protects the Carbon Block from premature blockages.
- 9β x 2.5β Made in Taiwan NSF Certified Coconut Carbon Block Filter with 1 micron pore size for the most efficient reduction of Chlorine, Taste and Odours, Pesticides, Herbicides, Volatile Organic Compounds (VOCs)*, Turbidity, Heavy Metals, and
- Protects the membrane from disinfectants such as chlorine and chloramines.
- 0.0005 micron pore size.
- When the water passes through this membrane rejects all molecules greater than 0.0005 microns. Repels Heavy Metals (Lead, Aluminium, Arsenic, Cadmium, Chromium, Copper, Nickel, Mercury), Iron, Chloramines, Parasites, Bacteria, Viruses, and Fluorides making the water free from all kind of contaminants.
- Produces acidic water.
- Stores water in a reverse osmosis tank at 16 L/h.
NOTE: Storage Tank: Standard comes along with 8 or 12 litres, you can additionally upgrade offered sizes are 18L, 21L, 35L, 60L, 80L, 100L and 150 litres tank.
4th Stage: TM CARBON BLOCK FILTER CARTRIDGE
- 9β x 2.5β Made in Taiwan NSF Certified Coconut Carbon Block Filter with 1 micron pore size for removal of any taste left behind.
- The Alkaline Filter raises the water pH+ level, and restores water natural minerals.
What does the system includes?
Contents:
- 3 x 10β x 2.5β Water Filter Housing Sump - Pre-assembled - Made in Taiwan
- 2 x 1/4β³ Connector Elbows Quick Connect with OβRing β No thread tape needed
- 1 x Chrome Faucet
- 1 x White 1/4β³Tube 2 Metres
- 1 x PLV 350 KPA
- 1 x Spanner
- 1 x Mains connector
- 5 x Filter Cartridges
- 1st Stage: POLY SPUN SEDIMENT FILTER
- 2nd Stage: TM CARBON BLOCK FILTER
- 3rd Stage: RO MEMBRANE
- 4th Stage: TM CARBON BLOCK FILTER
- 5th Stage: ALKALINE INLINE FILTER
What are the system dimensions?
320W x 440 H x 200 D (mm)
How often should I replace the filters?
- 1st Stage: POLY SPUN SEDIMENT FILTER: Dependant on water quality (6-12 months).
- 2nd Stage: CARBON BLOCK FILTER CARTRIDGE: 2,000 gal (1 Year).
- 3rd Stage: ULTRAFINE TFC RO MEMBRANE (3 Years).
- 4th Stage: CARBON BLOCK FILTER CARTRIDGE: 2,000 gal (1 Year).
- 5th Stage: ALKALINE INLINE FILTER: 2 Years.
Note: Filter capacity varies dependant on water quality.Β