WFL ROUSASQ Reverse Osmosis Water Filter

WFL ROUSASQ Reverse Osmosis Water Filter

The WFL ROUSASQ Reverse Osmosis Water Filter is a five stage reverse osmosis system with a Stainless Steel bracket that allows mounting the last two stages in the back. Conventional reverse osmosis have the last two stages on top.
  • Connects to your mains under your kitchen bench.
  • QMP Housings Made in the USA.
  • Dupont Filmtec Membrane Made in the USA.
  • John Guest Fittings Made in the UK.
  • Omnipure Filter Cartridges Made in the USA.
  • Engineered to provide ultra pure and healthy drinking water.
  • Platinum Edition Reverse Osmosis Water Filter.

What are the ROUSASQ Reverse Osmosis applications?

  • Connects to the cold water line (Under your kitchen bench).

Recommendations

  • If installed under the sink, this filter works with a flow rate of 16 L/h. Therefore, requires a reverse osmosis storage tank to collect water coming form the membrane to then have water available at 2.8 LPM.
  • Because the reverse osmosis membrane rejects polluted water, this system has a black tube that connects to the drain.

    Specifications

                What are the filtration Stages in the ROUSASQ Reverse Osmosis?

                1st Stage: NSF CERTIFIED SEDIMENT FILTER

                • 9” x 2.5” Triple Gradient Sediment Filter with 20, 10, 5 gradient micron pore sizes.
                • The dirt is trapped throughout the whole filter, rather than just in the outside (surface) like common sediment filters.
                • Protects the Carbon Block from premature blockages.

                2nd Stage: OMNIPURE CARBON FILTER

                • 9” x 2.5” Designed and Made in USA Filter.
                • NSF Certified Coconut Carbon Block Filter.
                • Captures particles grater than 10 micron.
                • Eco-friendly filter.
                • Protects the membrane from disinfectants such as chlorine and chloramines.

                3rd Stage: RO MEMBRANE

                • Produces ultra pure water.
                • Stores water in a reverse osmosis tank at a flow rate of 16 L/h.
                • Rejects all molecules greater than 0.0005 microns.
                • Only water molecules pass through the membrane.
                • Produces acidic water (like rainwater).

                4th Stage: OMNIPURE CARBON FILTER

                • 9” x 2.5” Designed and Made in USA Filter.
                • NSF Certified Coconut Carbon Block Filter.
                • Captures particles grater than 10 micron.
                • Eco-friendly filter.
                • Removes any taste left behind.

                5th Stage: ALKALISER INLINE FILTER

                • Restores water pH levels and natural minerals.
                • Remineralise the water with Calcium, Magnesium, and Potassium.

                What does the system includes?

                Contents:

                • 3 x 10” x 2.5” Water Filter Housing Sump - Pre-assembled - Made in USA
                • 2 x 1/4β€³ Connector Elbows Quick Connect with O’Ring – No thread tape needed
                • 1 x Chrome Faucet
                • 1 x White 1/4β€³Tube 2 Metres
                • 1 x PLV 350 KPA
                • 1 x Spanner
                • 1 x Stainless Steel Specialised Mounting Bracket
                • 1 x Mains connector
                • 5 x Filter Cartridges
                • 1st Stage: SEDIMENT FILTER
                • 2nd Stage: OMNIPURE CARBON FILTER
                • 3rd Stage: RO MEMBRANE
                • 4th Stage: OMNIPURE CARBON FILTER
                • 5th Stage: ALKALINE INLINE FILTER
                • 1 x Reverse Osmosis Storage Rank (8L)
                NOTE: Storage Tank: Standard comes along with 8 or 12 litres, you can additionally upgrade offered sizes are 18L, 21L, 35L, 60L, 80L, 100L and 150 litres tank.

                What are the system dimensions?

                360W x 440 H x 150 D (mm)

                How often should I replace the filters?

                • 1st Stage: SEDIMENT FILTER: Dependant on water quality (6-12 months).
                • 2nd Stage: CARBON FILTER: 2,000 gal (1 Year).
                • 3rd Stage: RO MEMBRANE (3-4 Years).
                • 4th Stage: CARBON FILTER: 2,000 gal (1 Year).
                • 5th Stage: ALKALINE FILTER: 1-2 Years.
                Note: Filter capacity varies dependant on water quality.

                Leave a comment

                Please note, comments need to be approved before they are published.