WFL Standard Undersink Water Filter

WFL Standard Undersink Water Filter – Two Filtration Stages

The WFL Standard Undersink Water Filter is a two stage filtration system that connects to your cold water mains and sits under your kitchen countertop.
  • Connects to your cold water mains with a mains connector supplied.
  • Engineered to provide safe and healthy drinking water.
  • Specialised in Lead removal.

What are the WFL Standard Undersink Water Filter applications?

Dedicated Chrome Drinking Faucet Dedicated Drinking Faucet

    Recommendations

    • Instead of having a separate faucet for filtered water, consider having a 3 Way Mixer to avoid drilling a hole through your stone/wood bench. 3 Way Mixers provide hot, cold and filtered water (all in one).
    • 3 Way mixers have one lever for hot and cold, and a separate lever for only filtered water.
    • In 3 Way Mixers, filtered water has a separate hole in the spout. Therefore, filtered and unfiltered water never touch.
    Undersink Water Filter Set Up Undersink Water Filter Set Up

    Specifications

    What are the filtration Stages in the Standard Undersink Water Filter?

    1ST STAGE: NSF CERTIFIED SEDIMENT FILTER

    • 9” x 2.5” Triple Layered Polypropylene Sediment Filter with 20, 10, 5 gradient micron pore size for the most efficient reduction of rust, mud, dirt, sand, silt, and other fine particles.

    2ND STAGE: OMNIPURE CARBON BLOCK FILTER

    • 9” x 2.5” Made in USA NSF Certified Coconut Carbon Block Filter with 1 micron pore size for the most efficient reduction of Chlorine, Taste and Odours, Pesticides, Herbicides, Volatile Organic Compounds (VOCs)*, Turbidity, Heavy Metals, and Parasites.
    • Eco-friendly filter
    • Developed in USA
    *Common examples of VOCs that may be present in our daily lives are: benzene, ethylene glycol, formaldehyde, methylene chloride, tetrachloroethylene, toluene, xylene, and 1,3-butadiene.

    What does the system includes?

    Contents:

    • 2 x 9” x 2.5” Water Filter Housing/Casing
    • 1 x Spanner
    • 1 x Stainless Steel Bracket
    • 2 x 1/4″ Elbows
    • 1 x ½” Tee - Mains Connector
    • 1 x PLV 350kPa
    • 1 x Installation Instructions
    • 1x Dedicated Chrome Faucet
    • 1 x 1/4" Food Grade Blue Tube
    • 2 x Filter Cartridges
    • 1st Stage: SEDIMENT FILTER
    • 2nd Stage: CARBON BLOCK FILTER CARTRIDGE

    How often should I replace the filters?

    • 1st Stage: SEDIMENT FILTER: (6-12 Months).
    • 2nd Stage: CARBON BLOCK FILTER CARTRIDGE: 2,000 gal (1 Year).
    Note: Filter capacity varies dependant on water quality

    Leave a comment

    Please note, comments need to be approved before they are published.