Omnipure OMB934 1M

What You Need to Know About the Omnipure OMB934 1M

The Omnipure OMB934 1M is a replacement filter cartridge with coconut shell activated carbon.

Model Number Breakdown

OMB934 1M OMB ► OMB Filter Series (Element filter for housings)

934 ► Size, 2.5” by 10”

1MMedia Code, 1 Micron carbon block

The part number on this filter represents the filter series model (first letters); the length and diameter (first two numbers); and filtration media (last two numbers).

What are the Omnipure OMB934 1M applications?

  • Suits Undersink Water Filters and Benchtop Water Filters with 10" x 2.5" housings or casings.

Recommendations

    • If installed under the sink, this filter needs a dedicated drinking faucet to filter water at 2.8 LPM.

Specifications

What's the Omnipure OMB934 1M Filtration Media?

  • When water passes through the 1 Micron Omnipure Carbon Block Cartridge, water is forced through the small pores of the Omnipure Carbon Block Cartridge, where mechanical filtration and physical/ chemical adsorption reduce chlorine, taste and odour, sediments, and a wide range of contaminants of concern —VOCs (pesticides, herbicides, and other chemicals).

How often should I replace the filter?

  • The Omnipure OMB934 1M should be replaced every year or after 56,781 litres of usage.
    • *As tested and verified by manufacturer’s laboratory
    • *Replacement Frequency also depends on water quality and usage.

Maintenance

    • Flush the filter with 5 gallons of water before use.
    • Replace the filter when filter reaches its capacity.

Leave a comment

Please note, comments need to be approved before they are published.