The Omnipure WL5515 is an Inline Filter with a superior carbon block in the inside.
Model Number Breakdown WL 55 15
WL ► WL Filter Series (Quick Change, Wind-Left)
55 ► Size, 2.5” by 10”
15 ► Media Code, 1 Micron superior carbon block with specialised lead removal media
The part number on this filter represents the filter series model (first letters); the length and diameter (first two numbers); and filtration media (last two numbers).
What are the Omnipure WL5515 applications?
- Replaces Puretec's QT12R.
- Replaces Omnipure WL Series Models.
Recommendations
-
- If installed under the sink, this filter needs a dedicated drinking faucet to filter water at 1.9 LPM.
Specifications
-
- MPN: WL5515
- Reduces Chlorine, Taste, Odours, Parasites, VOCs and Heavy Metals.
- Flow Rate: 1.9LPM
- Operating Temperature: 2°C to 38°C
- Maximum Pressure: 125 psi
- Model: WL-Series
- Manufacturer: Omnipure
- Certification: ANSI and NSF 42 for chlorine taste and odours and NSF 53 for parasites reduction.
What's the Omnipure WL5515 Filtration Media?
- When water passes through the 1 Micron Omnipure Carbon Block Cartridge with Lead removal media , water is forced through the small pores of the Omnipure Carbon Block Cartridge, where mechanical filtration and physical/ chemical adsorption reduce chlorine, taste and odour, sediments, and a wide range of contaminants of concern —VOCs (pesticides, herbicides, and other chemicals).
- This filter combines carbon, specialised filtration media to reduce heavy metals.
How often should I replace the filter?
- The Omnipure WL5515 should be replaced every year or after 4,731 litres of usage.
- *As tested and verified by manufacturer’s laboratory
- *Replacement Frequency also depends on water quality and usage.
- *Carbon filters are recommended to be replaced every year.
Maintenance
-
- Flush the filter with 5 gallons of water before use
- Replace the filter when filter reaches its capacity
- Screws: Counter Clockwise, Unscrews: Clockwise