What You Need to Know About the Omnipure E5515 SB

The Omnipure E5515 SB is an Inline Filter with a superior carbon block in the inside.

Model Number Breakdown E 55 15 SB

E ► Filter Series

55 ► Size, 2.5” by 10”

15 ► Media Code, 1 Micron superior carbon block with specialised lead removal media

SB ► Specialised to Fit Everpure QL1, QL2, QL3 Heads

The part number on each filter represents the filter series model (first letter); the length and diameter (first two numbers); filtration media (last two numbers); and connection type (last two letters).

What are the Omnipure E5515 SB applications?

• Without modification fits Everpure: 2CB5, 2CB5-K, 4CB5, H-54, S-54, WFA-12, EV9252-66, EV9720-06, WFA 12, WFA-6, WFA Pro1500-RC, EV9302-12, RV, ADC, EV9592-01, ADC-6, EV9252-67,EV9592-06, AC, EV959201, EV9252-67, ADC, EV959-206.
• With modification fits Water Filters Australia: WFA12, WFA Premium Cartridge, C-B-PREMIUM.

Please send us a picture of your current filter, and we will advise if it's the correct fit.

Recommendations

• • If installed under the sink, this filter needs a dedicated drinking faucet to filter water at 1.9 LPM.

Specifications

• • MPN: E5515 SB
  • Reduces Chlorine, Taste, Odours, Parasites, VOCs and Heavy Metals.
  • Flow Rate: 1.9LPM
  • Operating Temperature: 2°C to 38°C
  • Maximum Pressure: 125 psi
  • Model: E-Series
  • Manufacturer: Omnipure
  • Certification: ANSI and NSF 42 for chlorine taste and odours and NSF 53 for parasites reduction.

What's the Omnipure E5515 SB Filtration Media?

• When water passes through the 1 Micron Carbon Block Filter, water is forced through the small pores of the Coconut Shell Activated Carbon Block Cartridge, where mechanical filtration and physical/ chemical adsorption reduce chlorine, taste and odour, sediments, and a wide range of contaminants of concern including VOCs.
• The specialised carbon inside this filter reduces the concentration of heavy metals in the water. Lead, is commonly found in drinking water as it is still used in the manufacture of a wide range of plumbing products.

How often should I replace the filter?

• The Omnipure E5515 SB should be replaced every year or after 4,731 litres of usage.
  • *As tested and verified by manufacturer’s laboratory
  • *Replacement Frequency also depends on water quality and usage.
  • *Carbon filters are recommended to be replaced every year.

Maintenance

• • Note the arrow in the filter which indicates the flow direction
  • Flush the filter with 5 gallons of water before use
  • Replace the filter when filter reaches its capacity

Click here for more information about the Omnipure E5515 SB Carbon Block.