The Omnipure OMB934 10M P is a drop in filter for 10" x 2.5" housing sumps or casings.
Model Number Breakdown OMB934 10M P
OMB ► Filter Series
934 ► Size, 2.5” by 10”
10M ► Micron Size, 10 Micron Carbon Block
P ► Combined Media, Phosphate
The part number on each filter represents the filter series model (first letters); the length and diameter (first numbers); filtration media (last numbers); and combined media (last letter).
What are the Omnipure OMB934 10M P applications?
- Ideal for use in drinking fountains as well as under the counter systems.
- Also ideal to use it in conjunction with other purification systems and reverse osmosis systems.
- Usually used for coffee machines
Recommendations
-
- If installed under the sink, this filter needs a dedicated drinking faucet to filter water at 3.78 LPM.
Specifications
-
- MPN: OMB934 10M P
- Reduces Chlorine, Taste, and Odours.
- Flow Rate: 1.9LPM
- Operating Temperature: 2°C to 38°C
- Maximum Pressure: 125 psi
- Model: OMB-Series
- Manufacturer: Omnipure
- Certification: ANSI and NSF 42 for chlorine taste and odours and NSF 53 for parasites reduction.
What's the Omnipure OMB934 10M P Filtration Media?
- When water passes through the 10 Micron Omnipure Carbon Block Cartridge, water is forced through the small pores of the Omnipure Carbon Block Cartridge, where mechanical filtration and physical/ chemical adsorption reduce chlorine, taste and odour, and sediments.
How often should I replace the filter?
- The Omnipure OMB934 10M P should be replaced every year or after 37,854 litres of usage.
- *As tested and verified by manufacturer’s laboratory
- *Replacement Frequency also depends on water quality and usage.
- *Carbon filters are recommended to be replaced every year.
Maintenance
-
- Flush the filter with 5 gallons of water before use.
- Replace the filter when filter reaches its capacity.
Click here for more information about the Omnipure OMB934 10M P Carbon Block.