What You Need to Know About the Omnipure ELF 10M P SB

What You Need to Know About the Omnipure ELF 10M P SB

The Omnipure ELF 10M P SB is an Inline Filter with granular activated carbon and phosphate in the inside.

Model Number Breakdown ELF 10M P SB

ELF β–Ί ELF Filter Series (Extra Large Model)

10M β–Ί Micron pore size, 10 Micron

P β–Ί Phosphate within this filter inhibits corrosion and scale.

SB β–Ί Specialised to fit into Everpure Heads

The part number on this filter represents the filter series model (first letters); the micron rating (first number); Specialised Media (letter after the number); and connection type (last two letters).

What are the Omnipure ELF 10M P SB applications?

  • Connects to the cold water line.
  • Capable of filtering all the cold water coming out of your kitchen faucet.
Omnipure ELF 10M P SB Installation
Click here for more information about the high flow inline filter system.

Recommendations

    • If installed under the sink, this filter works with a flow rate of 6.3 LPM.
    • Can also be installed with a dedicated faucet, just for filtered drinking water.
Click here for more information about the high capacity inline filter system

Specifications

    • MPN: ELF 10M P SB
    • Reduces Chlorine, Taste, Odours.
    • Flow Rate: 6.3 LPM
    • Operating Temperature: 2Β°C to 38Β°C
    • Maximum Pressure: 125 psi
    • Model: ELF-Series
    • Manufacturer: Omnipure
    • Certification: ANSI and NSF 42 for chlorine taste and odours and NSF 53 for parasites reduction.

What's the Omnipure ELF 10M P SB Filtration Media?

  • When water passes through the 10 Micron Omnipure Granular Activated Carbon, water is forced through the small pores of the filter, mechanical filtration and physical/ chemical adsorption reduce chlorine, taste and odour, and sediments.
  • This filter combines carbon and phosphate to inhibit corrosion and scale.

How often should I replace the filter?

  • The Omnipure ELF 10M P SB needs replacing every year or after 37,854 litres of usage.
    • *As tested and verified by manufacturer’s laboratory
    • *Replacement Frequency also depends on water quality and usage.
    • *Carbon filters are recommended to be replaced every year.

Maintenance

    • Flush the filter with 5 gallons of water before use
    • Replace the filter when filter reaches its capacity
    • Twist Lock in type

Click here for more information about the Omnipure ELF-10M P SB

Leave a comment

Please note, comments need to be approved before they are published.